Cum se instaleaza Set amortizoare capota 2A.ST.4107.1 Rival pentru Nissan Navara

Are you interested how to install Hood Strut Kit 2A.ST.4107.1 Rival on Nissan Navara. Best Ride provides you with complete instructions on how to install the product, so that you or your mechanic can follow the appropriate steps.

Content

Gas strut 222297 – 2 pc.
Fender bracket- 2 pc.
Hood bracket – 2 buc.
Inside plank – 2 buc.
Screw М6х20 – 2 buc.
Bolt М5х16 – 2 buc.
Bolt M6x16 – 2 buc.
Washer 5 – 2 buc.
Washer 6 – 2 buc.
Washer 6 enlarged – 2 buc.
Installation guide – 1 buc.

Installation instructions Hood Strut Kit 2A.ST.4107.1 Rival on Nissan Navara

1. Unscrew fender mount bolt using socket wrench №10, (Pic.1).

Fig.1 How to install Hood Strut Kit 2A.ST.4107.1 Rival on Nissan Navara

2. Mount fender bracket, fix it using screw M6x20 with washer 6. Press the bend of bracket to the fender. Tighten screw M6x20 using tool HEX 5mm with torque 9 Nm, (Pic.2).

Fig.1-2 How to install Hood Strut Kit 2A.ST.4107.1 Rival on Nissan Navara

3. Screw molt M6x16 with washer 6 enlarged into the inside plank for a few revolutions, Pic.3).

4. Holding the bolt, put the inside plank into the hole in the amplifier of the hood, (Pic.4).

Fig.1-4 How to install Hood Strut Kit 2A.ST.4107.1 Rival on Nissan Navara

5. Combine the second threaded hole in the inside plank with a hole in the amplifier of the hood, (Pic.5).

6. Screw bolt M5x16 into the inside plank,Pic.6).

Fig.1-3 How to install Hood Strut Kit 2A.ST.4107.1 Rival on Nissan Navara

7. Mount hood bracket. Slide the bracket all the way up and to the side (toward engine compartment). Tighten bolt M6x16 using socket wrench №10 with torque 9 Nm.Tighten bolt M5x16 using socket wrench №8 with torque 6 Nm. (Pic.7).

Fig.1-6 How to install Hood Strut Kit 2A.ST.4107.1 Rival on Nissan Navara

8. Install another attachment same way.

Fig.1-7 How to install Hood Strut Kit 2A.ST.4107.1 Rival on Nissan Navara

9. Pump the struts ( put the strut against hard surface , then press and release it five times ).

10. Remove a factory prop rod . Click attachment points of the struts on the hinges . Struts are installed the rod towards the hood. (Pic.8 ) .

11. Smoothly and without jerks not fully close the hood. Ensure the absence of contact of brackets and gas struts with the vehicle parts and body.

12. Ensure that the factory clearances between the hood and fenders are normal. Adjust if necessary.

Despre Rival:

Rival este un brand premium, răspândit la nivel internațional:

730 angajați;
10 000 M2 spații de depozitare;
27 000 M2 spații de producție;
30 ingineri în departamentul R&D;
2 fabrici: IATF 16949:2016, ISO 14001:2015, ISO 9001:2015.
2 centre globale de logistică în Bremen Germania și Houston Texas.

ATTENTION: IN WINTER, THE SLIGHT THE LOWERING OF THE RIGIDITY OF THE GAS STRUT, THIS IS DUE TO THE PROPERTIES OF GAS‐FILLER

About Rival:

Rival is a premium brand, spread internationally:
730 employees;
10,000 M2 of storage space;
27,000 M2 of production space;
30 engineers in the R&D department;
2 factories: IATF 16949: 2016, ISO 14001: 2015, ISO 9001: 2015.
2 global logistics centers in Bremen Germany and Houston Texas.

In Romania and Bulgaria, Rival products are officially distributed to Best Ride.

5bd31642870b804f6c45fc6804c54618 How to install Hood Strut Kit 2A.ST.4107.1 Rival on Nissan Navara

The product can be purchased by accessing the following link: Hood Strut Kit 2A.ST.4107.1 Rival Nissan Navara

Cum se instaleaza Set amortizoare capota 2A.ST.4107.1 Rival pentru Nissan Navara

Content

Installation instructions Hood Strut Kit 2A.ST.4107.1 Rival on Nissan Navara

Despre Rival:

About Rival:

Related articles

Calculator Coroană-Pinion și Cutie de Transfer pentru Anvelope Mari 4×4

OUTDOORZ 2026 ajunge la ediția a 5-a: patru zile de offroad, outdoor și festival la Barcani

Ford Performance sărbătorește podiumul și momentele memorabile la Raliul Dakar 2025

Toyota Urban Cruiser: SUV Electric, debutează la AutoSalon Bruxelles 2025

LĂSAȚI UN MESAJ Renunțați la răspuns